Features
·More Than 128 Channels ·Low Loss and High Reliability ·Parallel Interface (TTL) ·Modularized Design ·Epoxy-free on Optical Path
Applications ·Ring Network ·Remote Monitoring in Optical Network ·Testing of Fiber, Optical Component
1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Specifications Parameters | Unit | GP-OSW1×N | Insertion Loss | dB | 1 < N ≤ 32 | 32 < N ≤ 64 | 64 < N ≤ 128 | Type: 0.8 Max: 1.0 | Type: 0.8 Max: 1.2 | Type: 0.8 Max: 1.3 | Wavelength Range | nm | 850±40 / 1300±40,1550 MM | 1260 ~ 1650 SM | Test Wavelength | nm | 850 / 1300,1550 MM | 1310 / 1550 SM | Return Loss | dB | MM ≥ 30 SM ≥ 50 | Crosstalk | dB | ≥ 70 | PDL | dB | ≤ 0.05 | WDL | dB | ≤ 0.25 | TDL | dB | ≤ 0.25 | ER (PM swtich) | dB | ≥ 16 (PoIarization Maintaining switch) | Repeatability | dB | ≤ ±0.05 | Durability | Cycles | ≥ 10 Million | Switching Time | ms | ≤ 10(Sequence switch time of adjacent channel) | Optical Power | mW | ≤500 | Operating Temperature | ℃ | -5 ~ +70 | Storage Temperature | ℃ | -40 ~ +85 | Relative Humidity | % | 5 ~ 95 | Dimension | mm | 135×40×32 (N≤12) | 135×60×32(N≤18) | 135×60×38 (N≤32) | 150×80×67 (N≤64) | 165×100×100 (N≤98) | 185×130×130 (N≤128) |
Pin Configurations DB-9 male connector (max.1×16) Pin No. | Signal Name | I / O | Description | 1 | D0 | Input | TTL, Channel selection bit 0 | 2 | D1 | Input | TTL, Channel selection bit 1 | 3 | D2 | Input | TTL, Channel selection bit 2 | 4 | D3 | Input | TTL, Channel selection bit 3 | 5 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. | 6 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) | 7 | ERROR | Output | TTL, Error (High=Error, Low=No error) | 8 | GND | Input | Ground | 9 | +5VDC | Input | 5.0±5% VDC Power Supply (max 800mA) |
DB-15 male connector (max.1×32) Pin No. | Signal Name | I / O | Description | 2 | D0 | Input | TTL, Channel selection bit 0 | 3 | D1 | Input | TTL, Channel selection bit 1 | 4 | D2 | Input | TTL, Channel selection bit 2 | 5 | D3 | Input | TTL, Channel selection bit 3 | 6 | D4 | Input | TTL, Channel selection bit 4 | 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. | 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) | 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) | 1, 9 | GND | Input | Ground | 15 | +5VDC | Input | 5.0±5% VDC Digital power supply (max 50mA) | 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA) | 14 | ISP | Input | TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground. | 10, 13 | NA |
|
|
DB-15 male connector (max.1×64) Pin No. | Signal Name | I / O | Description | 2 | D0 | Input | TTL, Channel selection bit 0 | 3 | D1 | Input | TTL, Channel selection bit 1 | 4 | D2 | Input | TTL, Channel selection bit 2 | 5 | D3 | Input | TTL, Channel selection bit 3 | 6 | D4 | Input | TTL, Channel selection bit 4 | 10 | D5 | Input | TTL, Channel selection bit 5 | 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. | 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) | 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) | 1, 9 | GND | Input | Ground | 15 | +5VDC | Input | 5.0±5% VDC Digital power supply (max 50mA) | 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA) | 14 | ISP | Input | TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground. | 13 | NA |
|
|
DB-15 male connector (max.1×128) Pin No. | Signal Name | I / O | Description | 2 | D0 | Input | TTL, Channel selection bit 0 | 3 | D1 | Input | TTL, Channel selection bit 1 | 4 | D2 | Input | TTL, Channel selection bit 2 | 5 | D3 | Input | TTL, Channel selection bit 3 | 6 | D4 | Input | TTL, Channel selection bit 4 | 10 | D5 | Input | TTL, Channel selection bit 5 | 13 | D6 | Input | TTL, Channel selection bit 6 | 11 | /RESET | Input | TTL, Low level reset to channel 0. High level means channel selection bits are effective. | 7 | /READY | Output | TTL, Ready (High=Not ready, Low=Ready) | 8 | ERROR | Output | TTL, Error (High=Error, Low=No error) | 1, 9 | GND | Input | Ground | 15 | +5VDC | Input | 5.0±5% VDC Digital power supply (max 50mA) | 12 | VM | Input | 5.0±5% VDC or 12±5% VDC Drive power supply (max 800mA) | 14 | ISP | Input | TTL, For internal firmware upgrade of the module, in the normal mode, please suspended the pin; In the upgrade mode, please send the pin to ground. |
Channel Selection Table Max Channel | Input | Active Channel | /RESET | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| N=16 | 0 | x | x | x | x | x | x | x | 0 reset | 1 | x | x | x | 0 | 0 | 0 | 0 | COM → 1 | x | x | x | 0 | 0 | 0 | 1 | COM → 2 | x | x | x | 0 | 0 | 1 | 0 | COM → 3 | x | x | x | … | … | … | … | … | x | x | x | 1 | 1 | 1 | 1 | COM → 16 |
| N=128 | 0 | x | x | x | x | x | x | x | 0 reset | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | COM → 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | COM → 2 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | COM → 3 | … | … | … | … | … | … | … | … | 1 | 1 | 1 | 1 | 1 | 1 | 1 | COM → 128 |
Optical Route
Timing Diagram
Dimension(DBx male head or female head is defined as the actual mark of the element) 01: 135×40×32-DB9 (N≤12, DB-9 male)
02: 135×60×32-DB9 (N≤16, DB-9 male) 03: 135×60×32-DB15 (N≤18, DB-15 male)
04: 135×60×38-DB15 (N≤32, DB-15 male)
05: 150×80×67-DB15 (N≤64, DB-15 male)
06: 185×130×130-DB15 (N≤128, DB-15 male)
Ordering Information: General switch : GP-OSW1×N-AB-CD-EF Polarization
maintaining switch : GP-OSW1xN-PM-AB-CD-EF N | A | B | C | D | E | F | Channel | Fiber Type | Test Wavelength | Tube Type | Fiber Length (Include connector) | Connector | Dimension | 1 ~ 128 | SM: SM, 9/125 M5: MM, 50/125 M6: MM, 62.5/125 X: Others | 85: 850nm 13: 1310nm 15: 1550nm 1315:1310/1550nm X:Others | 9: 900um 2: 2.0mm 3: 3.0mm X: Others | 05: 0.5m±5cm 10: 1.0m±5cm 15: 1.5m±5cm X: Others | OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC STP: ST/PC STA: ST/APC LP: LC/PC LA: LC/APC X: Others | 01: 135×40×32-DB9 02: 135×60×32-DB9 03: 135×60×32-DB15 04: 135×60×38-DB15 05: 150×80×67-DB15 06: 185×130×130-DB15 X: Others
|
|
