Product features
(1) It has the characteristics of low insertion loss and fast switching speed.
(2) Self detection of internal circuit of optical switch, fault alarm notification.
(3) The serial port adopts FT-232 industrial grade USB to RS-232 chip.
(4) Using an LCD display screen,
Very intuitive display of light path status, convenient for users to operate.
(5) The optical path switching settings can be controlled by sending commands through buttons,
serial ports, and network ports.And can lock button operations through serial port commands.
Performance index
Name | Parameter |
Model | 1X8-U |
Working wavelength | 1260~1650nm |
Insertion loss | ≤ 1.2 dB |
Repeatability | ≤ 0.02 dB |
Return loss | ≥ 50 dB |
Crosstalk | ≥ 70 dB |
Wavelength related loss | ≤ 0.25 dB |
Polarization related loss | ≤ 0.05 dB |
Fiber type | SM（9/125um） |
Connector form | FC\APC |
Monitoring port | RJ45、RS-232 |
Working power supply | AC：100~240V |
working temperature | -10 ~ +60℃ |
Storage temperature | -40 ℃ ~ +85 ℃ |
Chassis type | 1U19 inch（483 X 230 X 45） |
Light path diagram
Panel Description
Front panel
1) POWER: Device on/off button.
2) RJ45: Ethernet 10/100M communication interface.
3) RS-232: USB to RS-232 communication interface.
4) LCD display screen: display of device address, current channel, and related information.
5) ▲ - Move up key; ▼ - Move down key; Enter - Enter key; Esc - Cancel key.
6) Optical interface description: COM: is the input terminal (supports bidirectional); 1-8 are the output terminals (supporting bidirectional).
Rear panel
1) AC power interface: The input interface for the device's working power supply.
2) Equipment grounding connection terminal.
Precautions
1) When using this device, it is necessary to correctly connect each port according to the optical connection instructions.
2) The power supply should be grounded and ensure that the input power voltage is within the range required by this device.
3) If encountering sudden interference and the host experiences abnormalities, it should be shut down first before handling.
4) Slight vibration or sound when switching optical channels is a normal phenomenon.
5) The optical input port must be connected properly and accurately positioned, otherwise the measurement results and insertion loss may be incorrect.
For more details and instructions, please contact our online customer service!!!!!
